Flexible Magnetic Insect Screens for the Toyota Troop Carrier are available in a number of options.
1.0 Insect Screens for Windows
1.1 Passengers door window Flexible Magnetic Insect Screen for internal installation. The passengers door window is a mirror reverse of the drivers door window. To screen the passengers and drivers door windows you will require a separate screen for each window.
1.2 Drivers door window Flexible Magnetic Insect Screen for internal installation. The drivers door window is a mirror reverse of the passengers door window. To screen the passengers and drivers door windows you will require a separate screen for each window.
1.3 Sliding Windows The most popular option is a Flexible Magnetic Insect Screen that is made to a size to screen a window panel 88cm wide x 46cm deep. This size magnetic insect screen is a common size to fit any of the four sliding windows and can be installed internally. With a minimum of two of this size magnetic insect screen you can attach them to the sliding windows on one side of your Troopy or attach one on each side either at the centre or rear windows or diagonally to take advantage of prevailing breezes. If you want to screen the four sliding windows you will require four sliding window flexible magnetic insect screens.This option is by far the most popular.
2.0 Rear Opening Insect Screen
The Flexible Magnetic Insect Screen for the rear opening provides an effective insect screening barrier to the entire rear opening of the Toyota Troop Carrier. The Flexible Magnetic Insect Screen for the rear opening is comprised of mating mesh panels secured internally at the head of the rear opening in a track. The vertical perimeter seal down both sides of the opening is also provided by a track system. The seal between the mating mesh panels is provided by full length rare earth magnet. The bottom seal is also provided by a magnetic means of attachment.
Entry into and exit out of the rear opening is simply a matter of breaking the magnetic seal and moving through the mating mesh panels.
The product is robust and provides an effective barrier against insect entry.
The rear opening Flexible Magnetic Insect Screen can be removed in around 15 seconds and takes around the same time to reinstall.
The rear opening insect screens are available in kit form or can be installed by Top Gear 2 Go at our premises on the Gold Coast.The kit version is easy to install. The kit includes the completed insect screen, the track system, all attachment hardware and installation instructions. If you visit our premises we can install the rear opening insect screen for a modest installation price of $80.
The rear opening Flexible Magnetic Insect Screen is available in kit form in three configurations (2 panel, 3 panel or 4 panel insect screen) with two sealing options (magnets or zippers) as described below:
Four panel rear opening Flexible Magnetic Insect Screen provides a separate entrance point to the interior of the rear of the vehicle and a separate access point to a refrigerator, water supply or storage area that is normally accessed from the rear of the vehicle.
3.0 Sun Shields for Thermal Protection & Privacy.
Top Gear 2 Go Sun Shields are constructed from 12 layers of materials for ultimate thermal, acoustic and light performance; compliance and durability performance. The 99% Pure Aluminium on both sides of the sun shield reflect 95% of the radiant heat back into the atmosphere. A protective coating on the exterior facing aluminium foil provides oxidisation and corrosion protection. A heat laminated air bubble core provides an exceptional barrier against conductive heat, humidity, water and vapour penetration.
A Top Gear 2 Go Sun Shield Cabin Set is comprised of a two part windscreen sun shield and a sun shield for the passengers and drivers door window. The windscreen sun shields are made in two sections with a 100mm overlap in the middle. Each section has a vertical alloy stiffening rib built into the sun shield to prevent the sun shield from collapsing in extremely hot temperatures.
The reason that the windscreen sun shield is comprised of two sections is for ease of installation; particularly when electronic dashboard accessories such as GPS navigators, reversing camera screens and mobile phone holders obstruct access to the windscreen. The windscreen sun shields are installed and held into position by deploying the vehicles sun visors.
The Sun Shields for the passenger and driver door windows are custom made to the shape of the door window and are held into position by a magnetic means of attachment.The Sun Shields for the rear door windows and the sliding windows are also held into position by a magnetic means of attachment.
The windscreen sun shields for the VDJ78R series Troopy is a different depth than those for the HZJ75 and HZJ78 series Troopies. This is because the VDJ78R vehicle has airbags built into the dashboard thus decreasing the depth of the windscreen.
Sun Shields are available in the following combinations:
3.1 Sun Shield for Windscreen only
3.2 Sun Shield Cabin Set (Windscreen, passenger and driver door windows)
3.3 Sun Shield Rear Door Set
3.4 Sun Shield full vehicle set (includes the cabin set, rear door set and a sun shield for each of the four sliding windows)