Mitsubishi Express - SF, SG, SH, SJ Series

During the 1980's and 1990's the Mitsubishi Express van was in the top three which also included the Ford Econovan and the Toyota Hiace.

The Mitsubishi Express van has remained much the same for the last two decades, but apart from looking like it is out of the nineties it is still a popular vehicle for use as a campervan on weekends or for a full conversion.

Models available include the SF series (Rel. October 1986), SG series (Rel. December 1990), SH series (Rel.September 1991) and the SJ series (Rel. September 1994).

Products available for the Mitsubishi Express include insect screening solutions and solar screening solutions.

Insect Screens for Window Openings:

The Flexible Magnetic Insect Screen attaches externally to the ferrous metal body panels that surrounds the window frame. The Flexible Magnetic Insect Screen rolls up for storage in a tube or can be stored flat under the mattress.

Flexible Magnetic Insect Screens are available for the following window openings:

1. Passenger Door Window (Front Left). For external installation on windows that are not fitted with a weathershield.
2. Drivers Door Window (Front Right). For external installation on windows that are not fitted with a weathershield.
3. Sliding Door Window (Left Side Centre). Provides a 100 % seal to a window panel 103cm wide x 52cm high.
4. Right Side Centre Window. The Flexible Magnetic Insect Screen is made to a size to screen a window panel 104cm wide x 52cm high.
5. Right Side Rear Window. Window size nominally 93cm wide x 52cm high. 

Insect Screen for the Sliding Door Opening:

A Flexible Magnetic Insect Screen for the Sliding Door Opening (nominally 103cm wide x 126 cm high) is comprised of overlapping mesh panels secured internally at the head in a track. Flexible magnet provides the seal down each side of the opening and between the overlapping mesh panels. The bottom seal is also provided by a flexible magnetic fastener.

Entry into and exit out of your vehicle is simply a matter of moving through the overlapping mesh panels. The product is robust and provides an effective barrier against insect entry.

The Sliding Door Opening Insect Screen can be removed in around 10 to 15 seconds and is just as easy to reinstall. When the sliding door insect screen is not required it can be easily removed for storage using the optional storage hanger. 

Insect Screen for the Tailgate Opening:

Two options are available to screen the tailgate opening:

Option 1: The Tailgate Insect Screen Assembly is a non magnetic insect screening product  that is held in place by an elastic fastening device and provides a 100% seal  against insect pest entry to the tailgate opening. the tailgate is nominally 130cm wide x 131cm highfor the high roof version or 130cm wide x 121cm high for the low roof version. This product is an insect screen only and whilst accomodating access to storage areas and cabinets normally accessed via the tailgate opening does not provide for occupant access except in an emergency.

Option 2: The Flexible Magnetic Tailgate Insect Screen is comprised of three overlapping mesh panels that are held in an internally fitted track at the top of the rear opening. A two part flexible magnetic fastener seals the centre panel against the two outer panels for the full depth of the opening. The vertical perimeter seals are provided by a track system. When insects are not an issue the centre panel can be rolled up and tied at the top of the door opening.

Sun Shields for Thermal Protection & Privacy:

Sun Shields are available for internal installation to the windscreen only or as a cabin set (for the windscreen and also the passenger and drivers door windows). 

Buy now



Be the first to review this product!

add a review

Please ensure you are logged in to write a review.